Skip to content
Preston ReevesHeating & Air, Jacksonville 24/7 dispatch(904) 447-0914

Jacksonville, FL

Pool heat pump installation for Jacksonville homes

Pool heat pumps sized to the pool, plumbed into the filter system and wired correctly, so the water stays comfortable well past the summer months.

Updated September 2026

Quick answer

Is a pool heat pump a good choice in Jacksonville, FL?

A pool heat pump suits Jacksonville well because it pulls heat from warm outdoor air, which is plentiful here for most of the year, to extend the swimming season into spring and fall. It works best when sized to the pool and paired with a cover to hold heat overnight.

Overview

Moving outdoor heat into the pool

A pool heat pump works like an air conditioner in reverse: it pulls heat from the outdoor air and transfers it to the pool water passing through it. Because it moves heat rather than burning fuel, it's efficient when the air is warm, which describes Jacksonville for much of the year.

Getting it right starts with sizing. We look at pool volume, surface area, whether there's a spa, how warm you want the water and how late into the year you want to swim. Then we plumb it into the filtration line after the filter, wire it on its own circuit, and place it with enough clearance for airflow and drainage.

Pool heat pump plumbed into pool equipment

Cost factors

What affects the cost of a pool heat pump install

  • Unit sizeCapacity depends on pool size and heating goals.
  • PlumbingTying into the existing equipment pad.
  • ElectricalA dedicated circuit and disconnect.
  • PadA level pad with clearance and drainage.
  • SpaValves and controls for spa heating.

We size the unit to your pool and price the install in writing.

Options

Ways to heat a pool

OptionHow it heatsBest for
Pool heat pumpMoves heat from outdoor airExtending the season efficiently
Gas heaterBurns natural gas or propaneFast heating, spas
Solar heatingCollectors on the roofSunny days, low running cost
Heat pump + gasHeat pump for pool, gas for spaPools with attached spas
Pool coverHolds heat overnightAny heated pool

A cover helps any heating method hold its heat.

What is included

Every pool heat pump install includes

  • Pool volume and surface area measured
  • Unit sized to your heating goals
  • Level pad with clearance and drainage
  • Plumbed after the filter with bypass valves
  • Dedicated electrical circuit and disconnect
  • Water flow and flow switch tested
  • Controls set to your target temperature
  • Operation and care explained

What we fix

Pool heat pump sizing

An undersized pool heat pump runs constantly and never quite reaches the target temperature on cool days; an oversized one costs more than it needs to. Sizing depends on the pool's surface area and volume, how much heat you want to add, and how much wind and shade the pool gets. A pool cover dramatically reduces heat loss overnight, which can let a smaller unit do the job, and we'll factor that in if you use one. You'll see the sizing assumptions on the quote.

Spa heating

Heating a spa is a different job from heating a pool: a much smaller volume brought to a much higher temperature quickly. Many homes with an attached spa use valves to send heated water to the spa alone. A heat pump can heat a spa, but more slowly than a gas heater, so some owners pair the two. We'll explain the trade-offs so the setup matches how you actually use the spa. Controls can be set to switch between pool and spa heating automatically.

Heated spa beside a Jacksonville pool

Pool heat pump placement

Placement affects performance and lifespan. The unit needs clear space for air to move through it, a solid level pad, drainage for the condensation it produces, and a position that doesn't blow cold exhaust air toward where people sit. Near the coast, placing it away from direct salt spray helps. We plan the location with you before any plumbing is cut. Distance from the pool equipment matters too, since long plumbing runs lose heat and add pressure the pump has to overcome. Keeping the run short and tidy helps the whole system.

Brands we service and install

Trane, Carrier, Lennox, Rheem, Goodman, Daikin, Mitsubishi Electric, American Standard, Bryant, Ruud, Amana, Honeywell, York, Heil

Pool heating in Jacksonville's climate

Jacksonville's warm, humid climate is well suited to pool heat pumps, which draw their heat from outdoor air. On most spring and fall days there's plenty of warmth in the air to extend the swimming season, while the few cold snaps in winter are when a heat pump works hardest and a cover pays for itself. Sizing for the months you actually want to swim keeps the unit efficient.

How the job runs

How a pool heat pump install runs

  1. 1

    Visit

    Pool, equipment pad and electrical checked.

  2. 2

    Size and quote

    Unit and installation priced in writing.

  3. 3

    Pad and plumbing

    Unit set and plumbed into the filter line.

  4. 4

    Wire

    Dedicated circuit and disconnect installed.

  5. 5

    Start up

    Flow, heating and controls tested.

FAQ

Pool heat pump questions

How warm can a pool heat pump get the water?

Warm enough for comfortable swimming through most of the year here, depending on sizing and a cover.

Does a pool heat pump work in winter?

It works on cooler days, more slowly on the coldest ones. A cover helps a lot.

Is a heat pump cheaper to run than gas?

Usually, when the air is warm, since it moves heat rather than burning fuel.

Do I need a pool cover?

It's the single best way to keep heat in overnight.

Can it heat my spa?

Yes, though more slowly than a gas heater.

How long does a pool heat pump install take?

Usually a day.

Which pool heat pump brands do you install?

Hayward, Pentair, Rheem, AquaCal-style units and other major brands.

Related services

Other work on the same system

Heat Pump Installation

Variable speed and standard heat pumps that cool all summer and heat on cold January nights.

Learn more

Heat Pump Repair

Heat pumps stuck in defrost, blowing cold on heat, or leaning on aux heat all night.

Learn more

Furnace Repair

Electric heat strips and gas furnaces that fail on the first cold night of the year.

Learn more

Furnace Installation

Electric air handlers with heat strips and gas furnaces, matched to the cooling system.

Learn more

Pool Heat Pump Repair

Pool heat pumps that won't heat or show flow errors, diagnosed and fixed.

Learn more

Swim longer into the year

Call any hour to book a visit and a sizing for your pool.

Call and find us

One number, answered around the clock

Hours
Open 24 hours, 7 days a week
Service office
9532 Sunbeam Center Dr, Jacksonville, FL 32257
Head office
28473 W 1st St, Hilliard, FL 32046
Call (904) 447-0914
Service office
9532 Sunbeam Center Dr, Jacksonville, FL 32257
Call (904) 447-091424/7